Dimensions data

Supply Air Hood JSI-R-(UV-) Turbo and JLI-R-(UV-) Turbo

Wall hood

Island type hood

Hoods are made on a project-by-project basis, according to the planned dimensions. Hoods length and width can be chosen freely. A and B dimensions shall be at least 300 mm.

All dimensions are in millimeters (mm).

Positioning

The size of the canopy is determined by the size of the kitchen equipment. For this type of equipment, the overhang should be at least 300 mm.

The overhang depends on the type of equipment and the distance between the hood and the equipment. Above the side-opening devices, it is recommended to use a minimum of 400 mm edge overhang. Above the doors of opening or similar devices, it is recommended to have a door-to-edge overhang.

The typical distance between the hood side and the floor is 2100-2200 mm.

JSKI/JKI

wall hood

A–A=JSKI and B–B=JKI

JSKI

Island type hood

Hoods length, A and P dimensions can be chosen freely.
All dimensions are in millimeters (mm).

Positioning

The size of the condensate hood is determined by the washing or baking equipment below. As an edge overlay, it is recommended to 300 mm from the outside of the kitchen appliance. Above the side-opening devices, it is recommended to use a minimum of 400 mm edge overhang. Above the doors of opening or similar devices, it is recommended to have a door-to-edge overhang. The recommended distance between the hood and the floor is 2100-2200 mm.

JSI Supply Air Hood/JLI Hood

Wall hood 

Island type hood

Hoods length and width can be chosen freely.
Max. module size is 3000 mm x 1800 mm.
Filters require 440 mm of free space to open.